Kwikstage scaffold lap panels are a multi-purpose modular scaffold system that can be used for all kinds of access and support structures in the building and construction industry, shipbuilding, industrial maintenance etc
A 90mm high upstand of the same R.H.S. section is welded externally to one corner to accept a half fitting, which provides a positive fixture to the standard.
Welded on the underside of the R.H.S. square are two right angle seating plates which locate to the outer edge of the “T” section on the adjoining stage board brackets to provide added stability to corner filler.
Standard steel plate is used as a decking material and secured to the top section of the filler. Various sizes are available
eg: 3 board x 2 board, 2 board x 2 board, 2 board x 1 board etc.
Posted by Michael Deng (+86-15802506697 email@example.com)
Kwikstagev Scaffolding Standard vertical form the support or the uprights and are made from Standard Scaffold Tubes of 48.3 x 4 mm thick. They have a series of “V” pressed welded at nominal 500 mm on the tube to provide a location for ledger and transoms. Products are manufactured to Australian Standard AS1576.
Scaffolding, also called scaffold or staging, is a temporary structure used to support a work crew and materials to aid in the construction, maintenance and repair of buildings, bridges and all other man made structures.
At the construction site, scaffolding is used for the workers to work at height and it is easy to dismantle and install with good load bearing capacity. Then how to make sure the full safety of scaffolding in the construction?