Painted / Galvanised Kwikstage Scaffolding Corner Panel

Kwikstage Scaffolding Corner Panel is used to fill in the gap in eternal corners when stage board brackets are used.

A 90mm high upstand of the same R.H.S. section is welded externally to one corner to accept a half fitting, which provides a positive fixture to the standard.

Welded on the underside of the R.H.S. square are two right angle seating plates which locate to the outer edge of the “T” section on the adjoining stage board brackets to provide added stability to corner filler.

Standard steel plate is used as a decking material and secured to the top section of the filler. Various sizes are available

eg: 3 board x 2 board, 2 board x 2 board, 2 board x 1 board etc.


Posted by Michael Deng (+86-15802506697